Previous slide
Next slide

LW002-TH

LoRaWAN® Temperature&Humidity Sensor

LW002- TH is an advanced technical humidity and temperature sensor that is efficient and convenient in measuring both the temperature and the humidity. Unlike recent temperature and humidity sensors, it has a powered 8000mAh and a built non-chargeable battery. LW002-TH device has a wide range of uses and applications because it is compatible with indoor and outdoor environments.

> Established on LoRaWAN® Protocol
> Compatible with OTAA modes and configures ABP modes

Temperature & Humidity Sensor

LW002-TH has a super ability to detect both humidity and temperature through its sensor mechanism. Has unique configurable measurement threshold and intervals that help in sensing. The device has a particular modification, which stimulates to trigger an alarm if the point exceeds.

LW002-TH uses modern technology and the acquisition of humidity and temperature to maintain the high consistency, stability, and dependability of a product.

This Lorawan® temperature sensor comes with a long-lasting replaceable battery that can last for even10 years. However, the battery may last less or more than ten years depending on environmental factors, transmission interval, and data rate.

Temperature & Humidity monitoring by LoRaWAN Temperature&Humidity Sensor LW002-TH

Temperature & Humidity Sensor

LW002-TH has a super ability to detect both humidity and temperature through its sensor mechanism. Has unique configurable measurement threshold and intervals that help in sensing. The device has a particular modification, which stimulates to trigger an alarm if the point exceeds.

LW002-TH uses modern technology and the acquisition of humidity and temperature to maintain the high consistency, stability, and dependability of a product.

This Lorawan® temperature sensor comes with a long-lasting replaceable battery that can last for even10 years. However, the battery may last less or more than ten years depending on environmental factors, transmission interval, and data rate.

Supports external temperature and humidity probe

Three external probes are available: SHT30 Standard Probe, SHT30 Waterproof Probe, and PT100 Waterproof Probe.N/B: PT100 Waterproof Probe is restricted to support and sense temperature only

SHT30 Standard Probe

SHT30 Standard Probe

SHT30 Waterproof Probe

SHT30 Waterproof Probe

PT100 Waterproof Probe

PT100 Waterproof Probe

Multiple sensor interfaces are reserved

LW002-TH has broader compatibility that Supports interfaces for sensor customization.
For example, it supports RS485, I2C, ADC, GPIO interface.

sensor interfaces of LoRaWAN Temperature&Humidity Sensor

Ultra Low Power Consumption

The Lora® temperature sensor has a replaceable battery that can last for even 10 years.

It has a report configuration system that sends data twice daily.

Battery: Li-SOCl2 Battery ER18505 4000 mAh.

Internal structure of LoRaWAN Temperature&Humidity Sensor

Supports

> Detection of humidity and temperature through the sensor
> Exterior humidity and temperature probe.
> Compatible with: AS923MHZ, CN470MHZ, US915MHZ, EU868MHZ, AU915MHZ.
> Device parameter with a remote downlink server configuration.
> Threshold Alarm
> Multicasts and downlink
> Frequent plan for an inclusive range

Categories

> Wireless for IoT
> Thermal Sensors
> Sensors
> IoT

Extra features

> First response time
> Accurate humidity measurement
> High accurate temperature

Own LoRaWAN Stack

optimized for low-power operations, low latency, and global adaptability.

Easy Configuration

All parameters can be modified via APP easily and support OTA.

size of LoRaWAN Temperature&Humidity Sensor

LoRa Performance

LoRaWAN Protocol

V1.0.2

LoRa Frequency

US915/AU915/AS923/EU868/IN865

LoRa Range

Up to 4 km (in open area)

Tx Power

Max 19 dBm

Sensitivity

-142.5dBm@SF12 300bps

Application Parameter

Operating Temperature

-40℃~ +70℃

Operating Humidity

10%~90%

IP Rate

IP65

Physical Properties

Dimensions(L×W×H)

108.6mm×60mm×33.2mm

Net Weight

136g (±2g)

Shell Material

ABS

Color

White

Button

Mechanical

LED

RGB

Hardware

Power Supply

4000mAH non-chargeable battery

Sleep Mode Current

22uA

Operating Current

Max 150mA@20dBm

Motion Tracking

Built in 9 axis accelerometer MPU-9250

Positioning Mode

GPS

Application of LW002-TH

Software & Documentation

More Related Resources